DHCP: Verskil tussen weergawes

Content deleted Content added
RAM (besprekings | bydraes)
RAM (besprekings | bydraes)
Lyn 11:
DHCP outomatiseer die toeken van IP-adresse. 'n Kliënt op die netwerk stuur 'n versoek uit na 'n DHCP-bediener op 'n plaaslik verbinde netwerk. Die DHCP-bediener stuur dan 'n antwoord aan die kliënt met sy toegekende IP-adres, subnetmasker, DNS-bediener en standaard roetebeheerders.
 
Die toekenning van IP-adresse verval gewoonlik na 'n voorafbepaalde tydperk, waarna die DHCP-kliënt en -bediener weer 'n ooreenkoms moet bereik oor 'n nuwe IP-adres vanuit die bediener se voorafgedefinieerde adrespoel. DHCP is 'n uitsaai-protokol. Soos met ander uitsaaiverkeer op 'n netwerk gaan dit nie deur 'n [[roetebeheerder]] nie tensy dit spesifiek sodanig opgestel is nie. Gebruikers wat hierdie funksies verlang moet hulle roetebeheerders opstel om DHCP verkeer oor [[UDP]]-poorte 67 en 68 deur te laat.
 
<!-- Moet nog vertaal word
The assignment of the IP address usually expires after a predetermined period of time, at which point the DHCP client and server renegotiate a new IP address from the server's predefined pool of addresses. Configuring [[firewall (networking)|firewall]] rules to accommodate access from machines who receive their IP addresses via DHCP is therefore more difficult because the remote IP address will vary from time to time. Administrators must usually allow access to the entire remote DHCP subnet for a particular TCP/UDP port.
 
Most home routers and firewalls are configured in the factory to be DHCP servers for a home network. An alternative to a home router is to use a [[Linux]] computer with a fixed IP address as a DHCP server. ISPs generally use DHCP to assign clients individual IP addresses.
 
DHCP is a broadcast-based protocol. As with other types of broadcast traffic, it does not cross a router unless specifically configured to do so. Users who desire this capability must configure their routers to pass DHCP traffic across UDP ports 67 and 68.
 
==Implementations==